Home Research For Teachers HISTORY
Level 1
Level 2
Level 3
Level 1
Level 2
Level 3
Level 1
Level 2
Level 3
Search Hot Links What's New!
Gallery Feedback Admin/Tools

Please let me remind all of you--this material is copyrighted. Though partially funded by NASA, it is still a private site. Therefore, before using our materials in any form, electronic or otherwise, you need to ask permission.
There are two ways to browse the site: (1) use the search button above to find specific materials using keywords; or,
(2) go to specific headings like history, principles or careers at specific levels above and click on the button. 
Teachers may go directly to the Teachers' Guide from the For Teachers button above or site browse as in (1) and  (2).

FAQnewred.gif (906 bytes)          


1. The part of an airplane that produces lift is called a(n) .

2. The baseline for designing an airfoil in cross section is determined from the .

3. The amount of lift that a wing can produce is determined by the .

4. Bernoulli's principle states that as the velocity of a fluid increases, its pressure .

5. Lift is produced by the in pressure on top of an airfoil as the air passing over the top of the airfoil is     speeded up.

6. Name the parts of the airfoil shown by the arrows.




7. The relative wind is airflow produced by the moving through the air.

8. The relative wind flows in a direction with and to the direction of flight.

9. The angle between the chord of the wing and the longitudinal axis of the aircraft is called the


10. The is the angle between the chord of the wing and the relative wind.


ALLSTAR Network I.D.



Send all comments to allstar@fiu.edu
1995-2018 ALLSTAR Network. All rights reserved worldwide.

Funded in part by From
Civil Air Patrol
Educational Materials

Updated: October 02, 2005

If you don't have a NASA ALLSTAR ID click here!