Home Research For Teachers HISTORY
Level 1
Level 2
Level 3
Level 1
Level 2
Level 3
Level 1
Level 2
Level 3
Search Hot Links What's New!
Gallery Feedback Admin/Tools

Please let me remind all of you--this material is copyrighted. Though partially funded by NASA, it is still a private site. Therefore, before using our materials in any form, electronic or otherwise, you need to ask permission.
There are two ways to browse the site: (1) use the search button above to find specific materials using keywords; or,
(2) go to specific headings like history, principles or careers at specific levels above and click on the button. 
Teachers may go directly to the Teachers' Guide from the For Teachers button above or site browse as in (1) and  (2).

FAQnewred.gif (906 bytes)          

Aircraft Propulsion - Level 3

Gas Turbine Operation and Design Requirements


A turbine is any kind of spinning device that uses the action of a fluid to produce work. Typical fluids are: air, wind, water, steam and helium. Windmills and hydroelectric dams have used turbine action for decades to turn the core of an electrical generator to produce power for both industrial and residential consumption. Simpler turbines are much older, with the first known appearance dating to the time of ancient Greece.

In the history of energy conversion however, the gas turbine is relatively new. The first practical gas turbine used to generate electricity ran at Neuchatel, Switzerland in 1939, and was developed by the Brown Boveri Company. The first gas turbine powered airplane flight also took place in 1939 in Germany, using the gas turbine developed by Hans P. von Ohain. In England, the 1930's invention and development of the aircraft gas turbine by Frank Whittle resulted in a similar British flight in 1941.

The name "gas turbine'' is somewhat misleading, because to many it implies a turbine engine that uses gas as its fuel. Actually a gas turbine (as shown schematically in Fig. 1) has a compressor to draw in and compress gas (most usually air); a combustor (or burner) to add fuel to heat the compressed air; and a turbine to extract power from the hot air flow. The gas turbine is an internal combustion (IC) engine employing a continuous combustion process. This differs from the intermittent combustion occurring in Diesel and automotive IC engines.

turbo1a.gif (6501 bytes)
turbo1b.gif (7057 bytes)
Figure 1. Schematic for a) an aircraft jet engine; and
b) a land-based gas turbine.

Because the 1939 origin of the gas turbine lies simultaneously in the electric power field and in aviation, there have been a profusion of "other names" for the gas turbine. For electrical power generation and marine applications it is generally called a gas turbine, also a combustion turbine (CT), a turboshaft engine, and sometimes a gas turbine engine. For aviation applications it is usually called a jet engine, and various other names depending on the particular engine configuration or application, such as: jet turbine engine; turbojet; turbofan; fanjet; and turboprop or prop jet (if it is used to drive a propeller). The compressor-combustor-turbine part of the gas turbine (Fig. 1) is commonly termed the gas generator.

The original article from which this section is extracted, Introduction to Gas Turbines for Non-Engineers, by Lee S. Langston, University of Connecticut and George Opdyke, Jr., Dykewood Enterprises, can be found in the ASME International Gas Turbine Institute's "Global Gas Turbine News", Volume 37, No.2, 1997, and has been used with permission.


Send all comments to allstar@fiu.edu
1995-2017 ALLSTAR Network. All rights reserved worldwide.

Funded in part by NASA/LTP From ASME
The International Gas Turbine Institute
igti.gif (663 bytes)

Updated: March 12, 2004